Project Description



COMPOSITION
Product based on synthetic resins in water dispersion, mineral fillers, organic additives and antibacterial agent.
INTENDED USE
The primer is applied in one layer, which is plasticized after application. For surface preparation prior to the application of paint (the decoration). Specially designed formula for protection with plastic properties of the texture:
– as a final coating on plasterboard (old and new paints, plasters, concrete, oil paints) before applying the paint;
stabilizes the surface and completely equalizes the hiding power between different foundations and joints;
– with antibacterial additives for premises and areas of hifh humidity and risk of mold;
– as a final coating on plasterboard (old and new paints, plasters, concrete, oil paints) before applying the paint;
stabilizes the surface and completely equalizes the hiding power between different foundations and joints;
– with antibacterial additives for premises and areas of hifh humidity and risk of mold;
NOT ALLOWED
– application on wet surfaces
– application on sunlit walls at temperatures above +35°C
– application on sunlit walls at temperatures above +35°C
APPLICATION METHOD
Single application with a roller, brush or spray gun – without dilution. The application of paint should be after the complete drying of the primer (from 4 to 12 hours depending on the temperature)
STORAGE
In closed containers. The product is water-based. Protect from freezing! Storage from +5°C to +35°C.
CONSUMPTION RATE
1L – 14~16 m2 – for one layer
PACKAGING
2.5L/5L/10L/15L