Project Description
COMPOSITION
Water-dispersible synthetic resins, modified mineral fillers and additives.
INTENDED USE
The product is used for impregnation of cement, lime or gypsum plasters, putties, concrete surfaces, aerated concrete, bricks and other substrates before the application of latex, façade or oil paints. Adhesion of tiles with cement glue, wallpapers, cork tiling, parquet laying. For priming of substrates before application of self-leveling floor screeds. Waterproof protection on old plasters.
NOT ALLOWED
– application on wet surfaces and mixing with other products
– application on sunlit walls at temperatures above +35°C and temperatures below +5°С
– application on sunlit walls at temperatures above +35°C and temperatures below +5°С
APPLICATION METHOD
The substrate should be dry, clean, and sound. Damaged and loose coatings and plasters should be removed until reaching sound base.
– application of primer – brush, roller or spray gun
– if necessary, the primer can be diluted with water ( up to10%).
– application of primer – brush, roller or spray gun
– if necessary, the primer can be diluted with water ( up to10%).
STORAGE
In closed containers. The product is water-based. Protect from freezing! Storage from +5°C to +35°C.
CONSUMPTION RATE
1L – 14~16 m2 – for one layer
PACKAGING
5L/10L